El Bodega Wine Cooler es un mostrador de vino de temperatura y humedad constantes diseñado para bodegas, restaurantes y minoristas boutique.

Características del enfriador de vino de Bodega:

Control de temperatura doble

El Bodega Wine Cooler cuenta con refrigeración y ventilación independientes en las zonas superior e inferior. La zona superior es de 12-18 ° C para los vinos tintos, mientras que la zona inferior es de 5-12 ° C para los vinos blancos y espumosos refrigerados. La precisión del control de temperatura es de ±0,5°C. Los evaporadores dobles con ventiladores de velocidad variable vuelven al punto de ajuste en 10 minutos después de abrir la puerta. El panel táctil soporta conmutación de °C/°F e intercambio de zona de temperatura con un solo toque. El modo nocturno reduce automáticamente el flujo de aire y la iluminación, y el sensor de puerta suspende el retroflujo para evitar que el aire frío golpee directamente los corchos y cause sequedad.

Módulo de gran capacidad

El enfriador de vino Bodega mide aproximadamente 900 x 700 x 1800 mm, con una capacidad efectiva de 180-220 botellas. Ofrece 10-14 estantes, con una distancia de estantes ajustable de 85-110 mm, y es compatible con botellas de Borgoña y Champaña. Cada estante tiene una capacidad de carga de 20-25 kg, con una desviación de posición totalmente extendida de ≤1 mm y un ángulo de apertura de la puerta de ≥110 °, lo que garantiza una carga y descarga suaves de estuches enteros. El reposapiés ajustable montado en la parte delantera con un rango de desplazamiento de 0-30 mm hace que la nivelación sea más intuitiva.

Monitoreo de humedad constante

La humedad objetivo es de 55-75% RH, con una deriva de ≤±5% RH. La humidificación electrónica y la recirculación de condensación están integradas, y el Bodega Wine Cooler cuenta con un depósito de recarga de agua de 1,0 L incorporado, que proporciona alarmas audibles y visuales cuando el agua es baja, junto con el sello de tiempo. El conducto de aire incorpora una unidad de carbono activado y un recubrimiento antibacteriano de iones de plata. El cable de calentamiento anticondensación del marco de la puerta tiene una potencia de ≤6 W/m. Se impide que se forme agua en la superficie interna del vidrio, el corcho mantiene su elasticidad y sellado, y la etiqueta del vino no se infla.

Bajo ruido y ahorro de energía

El compresor inversor está lleno de R600a, nominal a 120-180 W; El nivel de ruido es ≤40 dB(A) a 1 m. El vidrio Low-E de tres capas y el aislamiento de alta densidad de ≥70 mm reducen el flujo de calor, lo que resulta en un consumo de energía anual de aproximadamente 200-300 kWh. Un compresor de arranque suave reduce los choques de arranque y apagado, asegurando una curva de funcionamiento suave durante todo el día.

Mejora de la vibración y almacenamiento estable

Las almohadillas de goma de suspensión y base del compresor proporcionan una doble amortiguación de vibraciones, reduciendo la transmisión de vibraciones a <0.5 mm. The wooden shelves feature ball-bearing cushioned guides for smooth extension and extension, and the bottle trays have soft-touch contacts to prevent metal resonance on the bottle shoulders. The unit is equipped with anti-tilt feet and leveling bulbs, ensuring stable operation even when fully loaded.

High-Color Rendering Light Source

Bodega Wine Cooler features dual LED linear lights on the top and side walls, with selectable color temperatures of 3000K/4000K and a color rendering index of Ra ≥90. The display tray can be equipped with a 6° tilting tray for clearer label reading from a distance. A scheduled light control program runs the display at full brightness during business hours and reduces the brightness to 20–30% during closing hours, ensuring readability while controlling energy consumption and ensuring accurate color cast in photos.

Durable Door

Bodega Wine Cooler's triple-layer insulating glass blocks UV rays ≥99%. The door frame is available in 304 stainless steel or anodized black aluminum. The handles are coated with an anti-fingerprint coating for easy cleaning. The hinges have a lifespan of ≥30,000 openings and closings and are interchangeable. The magnetic seal has a leakage rate of <1%, ensuring a tight seal even after long periods of use.

Intelligent and Secure

Over-temperature, water shortage, door opening, and sensor anomalies provide visual and audible alarms, with a visible display. Child lock and user-defined locks provide dual protection. The Bodega Wine Cooler automatically restores settings upon power failure and supports exporting 30-day temperature and humidity logs. Optional Wi-Fi/RS485 backend connectivity supports HACCP documentation for restaurants and remote inspections of chain stores. Two sets of permissions, electronic lock and mechanical key, facilitate shift handovers.

Embedded-Friendly

The front exhaust structure is compatible with embedded installation. A recommended opening is 910 × 720 × 1820–1850 mm, with a 50 mm or greater clearance in front of the door. After leveling the base, the cabinet body is flush with the uprights. A 60 × 600 mm return air duct is reserved at the kick plate for smooth heat dissipation. The minimum turning radius for transport aisles is 950 mm or greater, simplifying installation.

Bodega Wine Cooler Applications

Fine-End Restaurant Wine Display Wall

The Bodega Wine Cooler is positioned at the entrance or on the side wall of the main dining area, using a dual-temperature design to display red and white/sparkling wines separately. The lights are switched to full brightness one hour before the evening market, and during service hours, the night mode reduces airflow and illumination. The door opening angle of ≥110° allows sommeliers to quickly load and unload bottles, and the temperature recovery logic maintains the set curve even with frequent loading and unloading, keeping the display clear and tidy throughout the night.

In a restaurant or tavern, the back-of-house wine room

Bodega Wine Coolers are located in the connecting area between the bar and the serving area, with upper and lower zones maintained at 14–16°C and 6–8°C, respectively. Year/region labels are placed on the front edges of the shelves for a more intuitive first-in, first-out (FIFO) system. A magnetic door timer limits the door's open time, and during peak hours, the fan automatically speeds up to recover temperature. Inventory and replenishment can be completed between table turnovers, without disrupting the flow of the front-of-house.

Self-service beverage wall in the airport VIP lounge

In scenarios with high traffic and frequent door openings, the system automatically increases fan speed upon door magnetic triggering and delays light shutoff upon door closing to prevent flickering. Triple-layer glass's UV protection protects corks in highly illuminated halls. A noise level of 38–40 dB(A) doesn't interfere with announcements or phone calls, allowing passengers to quickly locate their desired wines and ensuring efficient service.

Members' club dining area entrance

Serving as a visual wine menu display, the lighting program is synchronized with the banquet's rhythm, day and night. Electronic door locks with tiered authorization allow sommeliers and wait staff to access the cabinets with varying permissions. A 30-day temperature and humidity log supports internal audits. The soft-touch bottle holders ensure that full cases remain stable even during short-term storage, allowing for quick switching of display shelves without disrupting traffic flow during changeovers.

Open kitchen in an urban apartment

Suitable for both family dining and everyday use, the cabinets are recessed into the side of the cabinets, leaving a 50mm gap in front of the door to ensure ventilation. Night mode reduces illumination and air volume, operating at 38–40 dB(A) without interfering with communication. For impromptu gatherings, the lower zone is pre-cooled to 6–8°C for sparkling wine, while the upper zone maintains a temperature of 14–16°C for red wine. The set point is restored within 10 minutes of opening the door, ensuring a smooth rhythm for home use.